日韩欧美第一区,懂色av中文字幕一区二区三区,快播av在线,午夜大胆裸体a级人体片,欧美精品国产一区,久久久久激情,97涩国一产精品久久久久久久

Job Title: Mechanical Engineer
職位名稱：機械工程師
Report To: Mechanical Engineering Manger
匯報對象：機械工程經理
Direct Reports: N/A
直接下屬：無
Mission:
職責使命：
As Mechanical Engineer, you will be part of our Asian Hub within the Global Projects organization. Our customers are in China, Korea, Japan, and Southeast Asia. Your mission is to make design of customer projects to produce high quality tightening solutions utilizing Atlas Copco standards products and best practices while ensuring the projects labor cost and timeline target.
作為一名機械工程師，你將成為我們?nèi)蝽椖拷M織中亞洲中心團隊的一員。我們的客戶分布在中國、韓國、日本以及東南亞地區。你的職責是針對客戶項目進行設計，運用阿特拉斯99科普柯的標準產品和***實踐方案，打造出高質量的擰緊解決方案，同時確保項目達成人工成本目標和時間進度目標。
Major responsibilities:
主要職責：
In order to achieve success in this function, Mechanical Engineer must perform the following tasks:
為了在該崗位上取得成功，機械工程師必須執行以下任務：
61 Translating commercial, functional and technical specification into detailed design inputs.
61 將商業、功能及技術規范轉化為詳細的設計輸入內容。
61 Support Proposal Engineers to clarify customer needs, evaluate potential risks and present feasible solutions with our best practices.
61 協助方案工程師明確客戶需求，評估潛在風險，并運用我們的***實踐方案提出可行的解決方案。
61 Collaborate with Project Managers to collect design required input information at the early stage of projects.
61 在項目初期與項目經理協作，收集設計所需的輸入信息。
61 Mechanical engineering from concept design to final solutions based on predetermined projects' scope.
61 根據預先確定的項目范圍，進行從概念設計到最終解決方案的機械工程設計工作。
61 Cooperate with cross-functional project team members in ensuring the final design meets the functionality, ergonomics, and cost and safety requirements.
61 與跨職能項目團隊成員合作，確保最終設計滿足功能、人體工程學以及成本和安全要求。
61 Take ownership to coordinate with relevant key stakeholders in driving projects to completion.
61 主動負責與相關關鍵利益相關者協調，推動項目完成。
61 Perform stress and displacement analysis to deliver theoretical calculation based design.
61 進行應力和位移分析，以實現基于理論計算的設計。
61 Create drawings and bill of materials in accordance with company procedure, regulations and standards.
61 按照公司的程序、規定和標準創建圖紙和物料清單。
61 Committed to agreed project timelines and labour hours, otherwise raise red flag proactively when deviation happens.
61 嚴格遵守商定的項目時間安排和工時計劃，若出現偏差，主動發出預警。
61 Organize design review meetings with team leaders and other project team members.
61 與團隊負責人及其他項目團隊成員組織設計評審會議。
61 Actively respond to technical problems in the manufacturing phase and perform corrective actions to ensure project progress.
61 積極應對制造階段的技術問題，并采取糾正措施以確保項目進展。
61 Manage Engineering change and be responsible for the accuracy and update of mechanical drawings and bill of materials.
61 管理工程變更，對機械圖紙和物料清單的準確性及更新負責。
61 Prepare assembly-level drawings, bill of materials, wear parts and spare parts list before project final acceptance.
61 在項目最終驗收前，準備好裝配級圖紙、物料清單、易損件和備件清單。
61 Trouble shooting and analyse root cause of quality issues to come up with solutions along with lesson learned.
61 排查故障并分析質量問題的根本原因，提出解決方案并總結經驗教訓。
61 Create, archive and maintain work related documents, such as design review protocols, customer visiting report, lessons learned, etc.;
61 創建、存檔并維護與工作相關的文件，如設計評審協議、客戶拜訪報告、經驗教訓總結等。
61 Standardize and validate potential repetitive used functional modules to reduce engineering labour hours.
61 對潛在可重復使用的功能模塊進行標準化和驗證，以減少工程工時。
Candidate profile:
候選人任職要求：
Education
教育背景

61 Bachelor degree or above in Mechanical engineering, automation or equivalent.
61 機械工程、自動化或相關專業本科及以上學歷。
Experience
工作經驗
61 3-5 years of mechanical design experience in automation system projects in automotive industry.
61 擁有 3 至 5 年汽車行業自動化系統項目的機械設計經驗。
61 Proven experience in non-standard equipment and fixture design.
61 具備非標設備和工裝夾具設計的成功經驗。
Knowledge
知識儲備

61 Strong understanding of mechanical design, mechanical principle and mechanical drawing.
61 對機械設計、機械原理和機械制圖有深入的理解。
61 Familiar with parts fabricating processes, heat treatment and surface finishing processes.
61 熟悉零件制造工藝、熱處理及表面處理工藝。
61 Basic understanding of automatic control principle and components' features, such as switches, sensors, encoders, motors, etc.
61 對自動控制原理以及開關、傳感器、編碼器、電機等元件的特性有基本了解。
61 Be proficient in pneumatic scheme design and components selection.
61 熟練掌握氣動方案設計及元件選型。
61 Strong understanding of material properties including high performance steels, stainless steels, aluminium, plastics, rubber and composites.
61 對高性能鋼、不銹鋼、鋁、塑料、橡膠及復合材料等材料的性能有深入理解。
61 Proficient with force analysis and Mechanics of materials.
61 精通受力分析和材料力學。
Skill
技能要求
61 Advanced level of CAD skills in Solidworks and AutoCAD.
61 熟練掌握 Solidworks 和 AutoCAD 軟件的高級 CAD 技能。
61 Proficient in Finite Element Analysis (FEA) in Solidworks Simulation.
61 熟練運用 Solidworks Simulation 進行有限元分析（FEA）。
Language
語言能力
61 Communicative level (spoken